Information

What Size Gravel to Backfill Fence Posts?

What Size Gravel to Backfill Fence Posts?



We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Gravel is a common backfilling for fence posts and comes in a variety of types. There are a couple of major factors to keep in mind when choosing gravel for fence post holes.

Drainage

When a fence post hole is dug, it creates a place for water to collect. This isn't a problem for the ground, but when you put a wooden fence post there, the collected water can cause the wood to rot over time. For metal fence posts, it will cause rust. Larger sized gravel will allow the water to drain through to the ground below so that the post isn't sitting in stale water for long periods of time. Overly large gravel will not sit in the hole as well, and the fence post will lack support.

  • Gravel is a common backfilling for fence posts and comes in a variety of types.
  • This isn't a problem for the ground, but when you put a wooden fence post there, the collected water can cause the wood to rot over time.

Post Support

Finer gravel will provide a more secure bottom for the fence post to set on. If the gravel is too fine, however, water will not drain through as well and may end up collecting around the fence post. For this reason, gravel mixed with sand, and extra fine gravel should be avoided.

What to Use

Pea gravel is commonly used for fence post holes. Gravel that is roughly three eighths of an inch in size is generally a good medium between drainage and support, though gravel close to that size also may be used. If you want to use the best gravel for your area, you may want to consult a contractor. They will know what kind of support is needed based on ground and weather conditions.

  • Finer gravel will provide a more secure bottom for the fence post to set on.
  • If the gravel is too fine, however, water will not drain through as well and may end up collecting around the fence post.

Set Fence Posts Using Pea Gravel

Wear gloves to protect hands when working. Make the hole twice as large as the post diameter. Level the post front to back and side to side with a construction level. Continue to add 6 to 8 inches of gravel at a time and then pack it with a tamp. Check with the construction level and add more gravel until the hole is filled to within 8 inches of ground level. Add water to moisten the concrete and allow to set overnight. Figure on about a gallon per 50-pound bag of concrete.

  • Wear gloves to protect hands when working.
  • Add water to moisten the concrete and allow to set overnight.


Watch the video: Marking the Fence Layout and Setting Your Posts (August 2022).